View Single Post
Old 03-19-2011, 01:18 AM   #10
crotex
Junior Member
 
Join Date: Mar 2011
Posts: 28
Default Re: Not getting fire!! Won't start. PLEASE HELP FAST!!

Still no luck at all with this thing. I have looked at a couple of different wiring diagrams. I have the ignition switch wire one side to the distributor, and one side wired to the positive side of the coil. Then I have a wire fron the negative on the battery to the post on the starter. From there it has a smaller wire ran to one of the post on the block mounted on the firewall. That same post on the firewall is also wire from there to the negative side on the coil. From the coil to the distributor I have a brand new plug wire. I also have a wire from the generator solenoid wire to the block on the firewall. I don't know what the hell is going on and why none of this will get spark. Does anyone know what is going on??
crotex is offline   Reply With Quote