[Teich]

I am in trouble big time, did 100% filtered,Canadian block( seems like thats all we have), I removed the pushrod bushing plugged the hole,drilled the block from rear cam bearing ,don't think I turned it, down to the rear bearing new hole in bearing and plugged the original oil hole from the oil pump. Where the oil preasure sender/filter is screwed in there are two holes one up from pump the other is into the gallery going to the engine, plugged between these oil comes up out side hole through the oil filter then back in the other hole it's run now for 10 000 miles. Forgot where I read about this---I guess ihad better find it! Laurie