View Single Post
Old 11-29-2012, 08:03 AM   #20
31chevy
Senior Member
 
31chevy's Avatar
 
Join Date: May 2010
Location: Lake City Mi.
Posts: 807
Default Re: KRW Float Level Gauge

Quote:
Originally Posted by ken ct View Post
You cut a "U" shaped cutout in the long edge the depth and width of the measurement you want to set the float at and just drop over the float when the top cover is upside down on the bench and adjust the float to the opening in the card. clear as mud right.I only use it on 94's. Stroms i use the one in the kit but leave about 1/16" space from the gauge to the float,so its slightly low. On the end NOT on the hump. ken ct.
Thank you.
Gary.
31chevy is offline   Reply With Quote