The Ford Barn - View Single Post

Model A Man · 07-13-2014, 04:47 PM

I am no expert by any means but what you could use is a large ratchet strap wrapped around the box and if need be clamp something on the diagonal to keep the other side from moving if it is in the proper location as you tighten the ratchet strap. keep an eye on all parts that you don't want to bend as you do this and be careful of breaking ratchet straps as they can fly and hurt or kill. I always lay a furniture pad over the strap to help lessen the flying strap if it were to break. if you do use this suggestion do so at your own risk, like I said I am no expert.

07-13-2014, 04:47 PM	#2
Model A Man Senior Member Join Date: May 2010 Location: Sarasota Florida Posts: 604	Re: Have you had to do this? I am no expert by any means but what you could use is a large ratchet strap wrapped around the box and if need be clamp something on the diagonal to keep the other side from moving if it is in the proper location as you tighten the ratchet strap. keep an eye on all parts that you don't want to bend as you do this and be careful of breaking ratchet straps as they can fly and hurt or kill. I always lay a furniture pad over the strap to help lessen the flying strap if it were to break. if you do use this suggestion do so at your own risk, like I said I am no expert.