The Ford Barn - View Single Post - 1935 front fender differences early

JM 35 Sedan · 07-06-2010, 10:02 AM

Quote from the EFV8C/A 1935-36 Ford Book.... "Early '35 front fenders were supported from underneath with a brace that extended from the frame to the outer edge of the fender. The fender was attached to the brace at the headlight mounting and to a flange on the inside edge of the fender. Later in the year these braces were shortened and terminated under the headlights"
I was not aware of these two different fenders having any slightly different profile in the peak. I have both type fenders and will take a look to see if I can see any difference in profile on mine. J.M.

07-06-2010, 10:02 AM	#5
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: 1935 front fender differences early - late Quote from the EFV8C/A 1935-36 Ford Book.... "Early '35 front fenders were supported from underneath with a brace that extended from the frame to the outer edge of the fender. The fender was attached to the brace at the headlight mounting and to a flange on the inside edge of the fender. Later in the year these braces were shortened and terminated under the headlights" I was not aware of these two different fenders having any slightly different profile in the peak. I have both type fenders and will take a look to see if I can see any difference in profile on mine. J.M. __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*