The Ford Barn - View Single Post

Chris in WNC · 11-08-2012, 08:20 PM

if you are using the silicone-type gasket rather than the copper one you will need to re-torque the head MULTIPLE times before it seals fully. been there, done that.

11-08-2012, 08:20 PM	#5
Chris in WNC Senior Member Join Date: May 2010 Location: Spruce Pine, NC Posts: 1,458	Re: water in oil if you are using the silicone-type gasket rather than the copper one you will need to re-torque the head MULTIPLE times before it seals fully. been there, done that. __________________ our next Model A is out there in the unknown......