Re: Cornhead grease in steering
I just filled my steering box on the tonner with JD cornhead grease about an hour ago. I had an old giant syringe with about a 1" bore and I cut the tapered tip off a bit and at 65 degree temp it sucked up it's capacity in about 10 seconds. It took two helpings to get to just below the fill plug. I didn't want to fill my one good grease gun with something I wouldn't use up. The woodie gets the treatment tomorrow. This syringe has been handy with other fluids such as brake fluid. Maybe from a veterinary supply?
__________________
Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1946 Tonner Pickup with 226 H six, 1979 Toyota landcruiser wagon, now wearing 1947 Ford Jailbar sheet metal. 'Rusty ol' floorboards, hot on their feet' (Alan Jackson)
|