[Charlie ny]

49,
The sbc dist does not require a lot of fancy smanchy attachments and
upgrades to be effective. Mine use single points and can spin the motor with no
point float past 5500 grand no sweat. If you wish to expiriment with the curve
you simply remove the cap and rotor and VIOLA the weights springs and limit bushing
are at your finger tips. No need to remove the dist from the motor.
Down the road if you wish to run 2x2's the all vac Loadmaster will receive
a too low vac signal and not function properly....the motor will run but it won't run
at its full potential.
Charlie ny