The Ford Barn - View Single Post

Fred A · 03-01-2015, 04:55 PM

Thanks Walt. That's exactly what I wanted to know. Out of the tens of millions of these engines made, there still is still is a tendency to keep the junkers. Where your list of possible keepers may seem long, sure saves a lot of space in the yard to rid the junk. Only two of the engines are post '48. Sure will keep one of the cranks and a set of rods for a backup to keep my options open. Thanks Again: Fred A

03-01-2015, 04:55 PM	#3
Fred A Senior Member Join Date: May 2010 Location: Encino California, near Burbank Posts: 935	Re: Saving Floating Rod Bearings? Thanks Walt. That's exactly what I wanted to know. Out of the tens of millions of these engines made, there still is still is a tendency to keep the junkers. Where your list of possible keepers may seem long, sure saves a lot of space in the yard to rid the junk. Only two of the engines are post '48. Sure will keep one of the cranks and a set of rods for a backup to keep my options open. Thanks Again: Fred A