Quote:
Originally Posted by john in illinois
I need a 28-34 reverse eye spring with 3/4" eyes to match spring perch. Model A has smaller shackle bushings. I can buy a new reversed main leaf with 3/4" eyes but I also have to buy a new standard spring to put it on. I do not want a Posie or easy slide spring.
Does anyone sell a complete reversed standard spring?
Thanks,John
|
You can do it yourself. Mark your spring on the garage floor with chalk. Then mark across the leaf at 2" intervals. Beat on those intervals with a BIG hammer and hit it until it is reversed and the same shape as your chalk mark on the floor. Another way is to use a bottle jack and press it into the reverse shape. A bit easier on the ears too. It takes a couple of hours to do, each hit or press will move it a little, so patience is required. I did mine, works fine.