The Ford Barn - View Single Post - ID manifolds for 46-48 engine in 41

19Fordy · 11-30-2015, 12:13 PM

There should be a casting part # on each manifold.
It's probably where you can't see it without using a mirror or "rubbing" it using
pencil and paper.
Get that number and you will know for sure.

11-30-2015, 12:13 PM	#2
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 10,950	Re: ID manifolds for 46-48 engine in 41 There should be a casting part # on each manifold. It's probably where you can't see it without using a mirror or "rubbing" it using pencil and paper. Get that number and you will know for sure. Last edited by 19Fordy; 11-30-2015 at 12:18 PM.