The Ford Barn - View Single Post

Henry/Kokomo · 10-18-2010, 07:18 PM

If the holes in your original wheels have "wallowed out", cone shaped washers are available, for about a dollar each, which will take up the slop when used with the stock lug nuts having a taper on the in-board side of the nut. Not very expensive and easy to install. If you have "stock" 1946 wheels, they are 5 X 5.5, as others have said.

10-18-2010, 07:18 PM	#5
Henry/Kokomo Senior Member Join Date: May 2010 Location: Kokomo, Indiana Posts: 1,731	Re: 1946 Ford Rims If the holes in your original wheels have "wallowed out", cone shaped washers are available, for about a dollar each, which will take up the slop when used with the stock lug nuts having a taper on the in-board side of the nut. Not very expensive and easy to install. If you have "stock" 1946 wheels, they are 5 X 5.5, as others have said.