Re: Y Block Rocker Shaft Overflow Tube
Quote:
Originally Posted by all american boy
fordy's
blocking OR restricting is not the way the
engine was designed.
i'm leaving them be.
i got enough work to do getting end plugs
out of rockershafts and running brush down through them.
Have A Nice Day!
|
The engine was designed 60 years ago! A few things have been learned since then. Enlarge the center cam journal groove for one. DuraBond cam bearings have recently been redesigned to improve Y top end oiling. C2AE rods were an improvement over the original EBU. C2AE blocks were an improvement over EDB. Longer main cap bolts were an improvement over earlier shorter ones. ARP bolts are an improvement over stock rod bolts. Forged pistons are an improvement over the original cast pistons. Forged HD cranks were an improvement over cast cranks. B 4V intakes are better than earlier A's. ..........
__________________
Mike, S. Oregon 46 Ford 1/2 ton, '62 Merc Meteor S33, '54 Ford 600 tractor, '64 Falcon Futura, 1960 Thunderbird
|