The Ford Barn - View Single Post

Barry B./ Ma. · 02-04-2011, 08:46 AM

I would also recommend that you use the 31 type hanger and disconnect the present support clamp under the tank because of the strain and vibration at that location. Both my A's (29 & 30) have the 31 style hanger. I wouldn't use JB Weld because eventually it will weaken in contact with gasolene. The 2 part Permatex product is a polyurethane which doesn't seem to be affected and is made for repairing steel fuel tanks. Make sure you drain the tank dry, clean the area well and after using the material let it set for a day before adding fuel.

02-04-2011, 08:46 AM	#5
Barry B./ Ma. Senior Member Join Date: May 2010 Location: Southbridge, Ma. Posts: 1,614	Re: Epoxy sealant for leaking gas tank? I would also recommend that you use the 31 type hanger and disconnect the present support clamp under the tank because of the strain and vibration at that location. Both my A's (29 & 30) have the 31 style hanger. I wouldn't use JB Weld because eventually it will weaken in contact with gasolene. The 2 part Permatex product is a polyurethane which doesn't seem to be affected and is made for repairing steel fuel tanks. Make sure you drain the tank dry, clean the area well and after using the material let it set for a day before adding fuel.