The Ford Barn - View Single Post - gas treatment/ stabilization that works for me

Tom Wesenberg · 05-03-2015, 03:39 PM

I also like Sea Foam. Back in the early 90's I bought an Old's cutlass real cheap because it sounded like it has rod knock. I checked the bearings, and they were good, but I replaced then anyway as long as I had the old ones out. I drove the car to the auto parts store and put in a can of Sea Foam. Before I drove the 4 miles back home, the engine was quiet as can be. It was a stuck lifter, and Sea Foam saved the day.

05-03-2015, 03:39 PM	#10
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: gas treatment/ stabilization that works for me I also like Sea Foam. Back in the early 90's I bought an Old's cutlass real cheap because it sounded like it has rod knock. I checked the bearings, and they were good, but I replaced then anyway as long as I had the old ones out. I drove the car to the auto parts store and put in a can of Sea Foam. Before I drove the 4 miles back home, the engine was quiet as can be. It was a stuck lifter, and Sea Foam saved the day.