View Single Post
Old 03-08-2012, 11:38 AM   #15
Steve Plucker
BANNED
 
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
Default Re: AA Spoked wheels

Quote:
Originally Posted by Bill Cilker View Post
1928-29 AA trucks used a Model A car front axle and brakes with different hubs and brake drums. The hubs only fit the 1928 AA 20" wire wheels with the small hubcaps and the 1929 6 hand hole concave disc 20" wheel. The 28-29 trucks with the car front axle used the worm drive rear axle.
The 1930-31 chassis with the larger front brakes and Bevel gear rear axle used 3 different styles of the 20" 5 hand hole Budd disc wheels. The 30-31 front axle was bigger and stronger than the car axle that it replaced. The 5 hand hole Budd wheels can be used as single or dual wheels on the rear axle. From January 1930 to about June of 1930, Ford used the 28-29 body style on this chassis.
Some deluxe AA trucks also had a 20" wire wheel with a larger hub cap than the 1928 wire wheel. These wire wheels require special hubs and brake drums. These are hard to find.
Bill,

Just when did the AA-3105 Front Spindle Assembly come into effect?

It is not listed in the October 1928 Parts Price List (PPL) but is listed in the June 1929 PPL..

Thanks.

Pluck
Steve Plucker is offline   Reply With Quote