View Single Post
Old 10-05-2023, 04:32 PM   #5
rackops
Senior Member
 
rackops's Avatar
 
Join Date: May 2010
Location: The Great Dismal Swamp
Posts: 186
Default Re: Installation of Schrader Valve Stems

I don't have any good advice...unfortunately I've lost one tube while installing the stem (the sides of the hole tore ever so slightly...enough for a slow leak) and lost a couple (not stem related) during installation.

I was going to replace the tubes on my Victoria with the pre-made metal stem ones, but alas, it seems they are not available (at least anywhere I've looked).
__________________
Member, MAFCA and MARC
Current owner, 1928 RHD Australian-built Phaeton CA4752 "Felicity" and a 1931 Victoria "Katie"
Former owner, 1929 Phaeton, 1929 Fordor
rackops is offline   Reply With Quote