The Ford Barn - View Single Post

slowspoke · 10-11-2020, 11:07 AM

Hey folks! I have an 8ba in the machine shop at the moment and would like to start drafting up a wiring diagram in preparation for mounting it on a stand. I never had the opportunity to see this motor wired up in its original format so this is all new territory for me. Looking for advice regarding this setup. I guess I’m primarily looking for a ‘bare bones’ schematic; however if I had high resolution of the original schematic I could attempt to work out the items that aren’t applicable. Any advice would be appreciated. BTW iv never worked on 6v system.

10-11-2020, 11:07 AM	#1
slowspoke Junior Member Join Date: Sep 2019 Location: Dallas/Fort Worth, TX Posts: 24	Engine Stand (wiring diagram) Hey folks! I have an 8ba in the machine shop at the moment and would like to start drafting up a wiring diagram in preparation for mounting it on a stand. I never had the opportunity to see this motor wired up in its original format so this is all new territory for me. Looking for advice regarding this setup. I guess I’m primarily looking for a ‘bare bones’ schematic; however if I had high resolution of the original schematic I could attempt to work out the items that aren’t applicable. Any advice would be appreciated. BTW iv never worked on 6v system.