The Ford Barn - View Single Post

Kevin - Illinois · 05-05-2012, 07:06 PM

I made up a shim and turned the motor over with a crank and the 5/8 shim fit a tad loose between the bottom of each finger and the collar. I think they are correct. I readjusted the clutch to about 1" of play and everything looks right.

05-05-2012, 07:06 PM	#4
Kevin - Illinois Senior Member Join Date: May 2010 Location: Ottawa, Illinois Posts: 401	Re: Need help with pressure plate I made up a shim and turned the motor over with a crank and the 5/8 shim fit a tad loose between the bottom of each finger and the collar. I think they are correct. I readjusted the clutch to about 1" of play and everything looks right.