Re: Bumper bolt removal
Thanks ctlikon0712!
For safety & for other reasons, something else with electrolysis:
1. Don't do electrolysis in a room with an intermittent open flame or one with a constant open flame pilot light on something like a gas water heater or a gas stove -- explosive hydrogen is emitted in the process.
2. Don't experiment with other unknown chemicals such as salt which can emit chlorine gas -- just follow the directions.
3. Don't do this process in any unventilated habitable areas, or near your Model A with the doors open -- the strong smell is something never before experienced -- also, if spilled, the water gets to look like it could really mess up & stain a finished floor or concrete slab.
|