The Ford Barn - View Single Post

carguy01 · 05-25-2013, 12:30 PM

I am putting a 5.0. in my 55 fairlane and I know other people have done this before, I have the energy suspension trans mount and I am wondering how
or where the mount was installed on the crossmember,because the mount is around 3 in. taller than the stock rubber one. I have already Installed a fat man frront clip on the car. Did anyone mount it to the top of the crossmember or make a plate to extend off the mount and make a piece to drop the mount to make it the original height. any help would be appreciated.

05-25-2013, 12:30 PM	#1
carguy01 Member Join Date: Aug 2011 Location: ma, Posts: 70	help with 5.0 A.O.D. swap I am putting a 5.0. in my 55 fairlane and I know other people have done this before, I have the energy suspension trans mount and I am wondering how or where the mount was installed on the crossmember,because the mount is around 3 in. taller than the stock rubber one. I have already Installed a fat man frront clip on the car. Did anyone mount it to the top of the crossmember or make a plate to extend off the mount and make a piece to drop the mount to make it the original height. any help would be appreciated.