The Ford Barn - View Single Post

Tom Wesenberg · 11-01-2011, 08:39 AM

With the body on the frame I would think it would be easier to pull each by itself, and reinstall the tranny first, then the engine.

Be sure to pull the throttle crosshaft first, and reinstall it after the engine and tranny are bolted in place.

11-01-2011, 08:39 AM	#2
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Engine trans.swap With the body on the frame I would think it would be easier to pull each by itself, and reinstall the tranny first, then the engine. Be sure to pull the throttle crosshaft first, and reinstall it after the engine and tranny are bolted in place.