The Ford Barn - View Single Post

ken ct · 03-31-2013, 02:23 PM

You must set points with the coil screwed down to the dist,or you will lose about .003-.004 " setting with out it.So your down to around .011 setting if coil was not on it.Recheck it with it on. ken ct.

03-31-2013, 02:23 PM	#3
ken ct BANNED Join Date: May 2010 Location: stratford,ct Posts: 5,971	Re: Ignition timing 1941 flathead You must set points with the coil screwed down to the dist,or you will lose about .003-.004 " setting with out it.So your down to around .011 setting if coil was not on it.Recheck it with it on. ken ct.