The Ford Barn - View Single Post

Peter J · 11-01-2011, 10:00 AM

I was thinking that all I need is to lift it so the pan clears the x-member with the cg toward the rear. I would be using chains from the spark plug holes at least for now. Looks like the predominant opinion is lifting as a unit and watching out for the breakables.

11-01-2011, 10:00 AM	#10
Peter J Senior Member Join Date: Jul 2010 Location: Olympia, WA Posts: 691	Re: Engine trans.swap I was thinking that all I need is to lift it so the pan clears the x-member with the cg toward the rear. I would be using chains from the spark plug holes at least for now. Looks like the predominant opinion is lifting as a unit and watching out for the breakables.