07-16-2012, 06:43 AM
|
#16
|
Senior Member
Join Date: Feb 2011
Location: Lincoln, Nebraska
Posts: 1,910
|
Re: New wiring harness, and a question:
Quote:
Originally Posted by Tom Wesenberg
The loose one I worked on I removed the bottom 4 bolts and took the part out, then staked it with a sharp center punch in several places all the way around. That tightened it up just fine. No, the bail will not hold it from turning if the plate is loose on the bushing.
|
Thanks Tom.
|
|
|