Quote:
Originally Posted by panhead_pete
Thanks guys, will I need a different drive shaft to run from the 35 box to the 33 diff?
|
You will need a 33 trans mount on your 35 Box and everything else will bolt together. The torque tube an drive shaft will fit right up as long as your car originally had a V-8 Engine and not a 4 Cyl. If your car was a 4 Cyl. Car, the drive shaft and torque tube will be
Apx. 1 1/2" too long. There is an ongoing Thread on The Barn on this subject.
If you let us know the
overall lingth of your torque tube, (Front end of bell to flange, where it bolts to the center housing of the rear axle) we can tell if it is a V-8 or 4 cyl.
As far as Hydraulic Brakes are concerned, you need to get in touch with Richard at The Early V-8 Garage. (626) 338-2282. He makes a complete kit to install Hydraulic Brakes on your Early V-8 Ford. I have his kit on my '34 and it is really great. He can supply every part you will need.
Good luck with your project and be sure to let us know how you are proceeding.
Chris