Re: 35 PU gas filler neck vs 35 sedan filler neck
Quote:
Originally Posted by flatheadfan
Lawson-
I can't speak for others but don't get your hopes up with a Drake fuel neck. I have a '35 and a '36 and in both cases the Drake neck did not match an original in curvature. In fact they were non-reshapeable. If interested, I can forward to you several pictures with measurements. If you get a chance, look over this past posting:
http://fordbarn.com/forum/showthread.php?t=143498
Tom |
Thanks Tom for referring back to a former thread that has the picture I was looking for. I was thinking of using a sedan neck on my pickup to keep gas from sloshing out on right turns. I think the sedan neck would work fine. Now to find one. 
I presently have a neck on mine that I had bent to the angle I thought I needed, then cut the center of a PU filler neck and welded the fabricated piece in the center. Only the initiated can tell it isn't stock. 
__________________
Life is like a roll of toilet paper. The closer to the end, the faster it goes.
It is better to be seen, than viewed.
"We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm".
|