The Ford Barn - View Single Post - Parts

Brianhd409 · 01-22-2012, 11:32 PM

I was able to get the "Rivet" for the pistol grip emergency brake lever on 1928 Model A's. I have got a quote to have them reproduced. Around $7.00. Includes the rivet, washer and std for the spring internally.

I also was able to get the bolt that mounts in the timing hole for a Powerhouse Generator. If I have 25 made, it would cost around $21.00 dollars. 50 made would be around $17.00.

I will not do this if there is not enough interest by Ford Barn members. These are my cost and I would sell them at cost just to support our organization.

Please respond to this post with your input so I can determine if it is worth going forward and have these rare parts made.

Many thanks Brian

01-22-2012, 11:32 PM	#1
Brianhd409 Junior Member Join Date: Oct 2010 Location: Minneapolis, MN Posts: 16	Parts - Rare Hard To Find City: Minneapolis State: MN Price: 1 I was able to get the "Rivet" for the pistol grip emergency brake lever on 1928 Model A's. I have got a quote to have them reproduced. Around $7.00. Includes the rivet, washer and std for the spring internally. I also was able to get the bolt that mounts in the timing hole for a Powerhouse Generator. If I have 25 made, it would cost around $21.00 dollars. 50 made would be around $17.00. I will not do this if there is not enough interest by Ford Barn members. These are my cost and I would sell them at cost just to support our organization. Please respond to this post with your input so I can determine if it is worth going forward and have these rare parts made. Many thanks Brian