Quote:
Originally Posted by Tom Wesenberg
I would just install them on your Model A and see how it runs. It only takes a minute or two to change the condeser following this proceedure:
1. Have the new condenser laying next to the distributor.
2. From the passenger side, remove the ground screw first.
3. From the driver's side, remove the terminal screw and keep light pressure on the screw while you slip out the old condenser and slip in the new one.
4. Tighten the terminal screw.
5. Tighten the ground screw.
|
boy i just fought with one the other day the screw wouldnt start straight in the condensor i ended up pulling the plates out and then was able to get it started.