Quote:
Originally Posted by Jeff/Illinois
I do that now too, Tom.
Probably a lot of good condensers laying around on workbenches all over the U.S.-------
Can they be checked at a place like Radio Shack or something to see if they are 'good'? Seems like I read the procedure once on how to sort out good ones can't recall off hand what it was.
|
I would just install them on your Model A and see how it runs. It only takes a minute or two to change the condeser following this proceedure:
1. Have the new condenser laying next to the distributor.
2. From the passenger side, remove the ground screw first.
3. From the driver's side, remove the terminal screw and keep light pressure on the screw while you slip out the old condenser and slip in the new one.
4. Tighten the terminal screw.
5. Tighten the ground screw.