Sponsored Links (Register now to hide all advertisements)
Hi
on the 41 tail light conversion. Here are some of the sugestions i played with:
Painting the entire tail light housing
white inside bulb bracket and all
the :l"shaped bulb socket bracket is only held in the housing with two small rivits. They can be drilled out and the relocated deeper inside of the housing so a haligon bulb would fit. Also as i remember, there is room for two bulbs inside the housing
drill heat vent holes in the housing so the haligon heat can get out
make sure there is a good ground for all bulbs, and everything electric. I
big al