View Single Post
Old 04-04-2012, 08:07 PM   #6
Stinch
Senior Member
 
Stinch's Avatar
 
Join Date: May 2010
Location: Connecticut
Posts: 220
Default Re: Alignment Camber Problem

Sponsored Links (Register now to hide all advertisements)
Great information on Kevin's web site. Discovered my axle was bent back on the right side with the bend to the left of the spring perch. Armed with the information and measuring tools from Kevin's site, I took it to my machinist who used an 80-100 ton press to bend it back to specification. Cost me $80.

Rich
__________________
E30 68-B Cabriolet
Stinch is offline   Reply With Quote