The Ford Barn - View Single Post

Bob NH · 07-15-2014, 03:14 PM

I'm baaaaaack ! Took you folks advise and changed out the distributor as well as a new condenser from NAPA. Really don't like working on these old beaters as well as some of ya but got it done anyway. Rather glad after seeing the condition of the one I took off that it went south here and not on the road someplace. I took a few pics but always have trouble trying to post on here. When I started it, it seems to be rather in retard a bit too much but Bubba has marked the setting so will try not to tinker with it. Have to see how it goes down the road. Also had to set the idle a bit more but so far so good and thanks to all the guys for suggestions. Now another one off to Indiana for refurbishing soon so I have a spare again !

07-15-2014, 03:14 PM	#13
Bob NH Senior Member Join Date: May 2010 Location: Meredith, N.H. Posts: 766	Re: Where to start ? I'm baaaaaack ! Took you folks advise and changed out the distributor as well as a new condenser from NAPA. Really don't like working on these old beaters as well as some of ya but got it done anyway. Rather glad after seeing the condition of the one I took off that it went south here and not on the road someplace. I took a few pics but always have trouble trying to post on here. When I started it, it seems to be rather in retard a bit too much but Bubba has marked the setting so will try not to tinker with it. Have to see how it goes down the road. Also had to set the idle a bit more but so far so good and thanks to all the guys for suggestions. Now another one off to Indiana for refurbishing soon so I have a spare again !