The Ford Barn - View Single Post - 16 in wheel

Art Bjornestad · 12-01-2014, 10:06 PM

I run tubeless but use a layer of silicone seal on the valley of the rim where the spokes are welded. I also run some emery cloth over the lip of the rim where the tire meets it to smooth any bumps.

12-01-2014, 10:06 PM	#2
Art Bjornestad Senior Member Join Date: May 2010 Location: Westlake Village, CA Posts: 477	Re: 16 in wheel - tube needed? I run tubeless but use a layer of silicone seal on the valley of the rim where the spokes are welded. I also run some emery cloth over the lip of the rim where the tire meets it to smooth any bumps.