View Single Post
Old 10-18-2014, 12:36 AM   #39
Old Henry
Senior Member
 
Old Henry's Avatar
 
Join Date: Oct 2010
Location: Orem, Utah
Posts: 5,762
Default Re: Ideas for vibration problem in 59A

Good news! My mechanic garage seems to have turned into "Golden Rulers" meaning that they have decided to take full responsibility to get the engine running right no matter what it takes on their dime instead of mine. I imagine it's a hard pill to swallow but, if they thought about the tables being turned, I'm sure they would want the same as I expected.

Unfortunately, from their "research" and "talking to people" they have concluded that the vibration is coming totally from the Fort Wayne clutch I bought and gave them to put on. So, their plan is to remove the engine, put a different clutch on, and put the engine back in to see if that fixed it. I, of course, wondered why they just didn't check everything while they had the engine out - crank balance, flywheel and clutch balance, piston and rods balance. They are just so sure that it is just the clutch. "So, what if that one change doesn't get rid of the vibration? Then what?" I ask. "Well, we'll just have to take the engine out again and try something else." Oh boy. Oh well, as long as it's on their dime I guess if they want to take it out, change the paint color, and put it back in to see if that fixes it, fine by me. At least they are taking full responsibility to get it right and satisfy me as their new customer. That's a relief and take a load off me.
__________________
Prof. Henry (The Roaming Gnome)
"It is good to have an end to journey toward; but it is the journey that matters, in the end.” *Ursula K. Le Guin in The Left Hand of Darkness
Old Henry is offline   Reply With Quote