The Ford Barn - View Single Post

curleeman · 04-10-2011, 03:17 PM

36tbird, no I'm not a member of that group,I'll look into them as well. Yeah I've been doing a lot of research and reading (2-3 yrs) on the rebuild of the flathead.The old flatheads definetely need a full flow oil system and the lifter bosses drilled so you don't beat up your knucles adjusting the lifters.I believe it's within my skill level,just a matter of doing things correctly and maticulously. Thanks for the insite...Any more info would be helpful.

04-10-2011, 03:17 PM	#5
curleeman Junior Member Join Date: Apr 2011 Location: Haslet,Texas Posts: 23	Re: Flathead builders in Texas? 36tbird, no I'm not a member of that group,I'll look into them as well. Yeah I've been doing a lot of research and reading (2-3 yrs) on the rebuild of the flathead.The old flatheads definetely need a full flow oil system and the lifter bosses drilled so you don't beat up your knucles adjusting the lifters.I believe it's within my skill level,just a matter of doing things correctly and maticulously. Thanks for the insite...Any more info would be helpful.