Quote:
Originally Posted by Pomeroy41144
Looks like the shifter would have to go back quite a ways. Maybe too close to a bench seat.
|
NOT too close to a bench seat if you use an S-10-type tailshaft HOUSING, or a Jeep 4X4 tailshaft housing like in the picture below. These tailsgaft housings move the shifter much farther forward, to a location only about 7" behind the Henry Ford 3-speed shifter location. The picture below is a Camaro T5 with Jeep 4X4 tailshsft housing and tailshaft which we made-up to achieve the shortest T5 that can be assembled. It's shown here behind an 8BA flathead in a '35 Ford pick-up truck. Note the distance FORWARD of the bench seat riser. And yes, that's a torque tube bolted to the back of the T5. Click on
T5 W/TORQUE TUBE on the lower left for the full story! DD