View Single Post
Old 02-07-2012, 04:26 PM   #13
pooch
Senior Member
 
pooch's Avatar
 
Join Date: Sep 2010
Location: South Coast NSW Australia
Posts: 2,596
Default Re: old Brake Floaters

Re making the outside look original instead of just a prise out plug... is there room inside to weld/braze a nut or a a half width nut with a few threads and get an original wedge bolt and have a few threads extension so it can screw into the hole so the outside appearance with castle nut and split pin is good, and it can be unscrewed if floater is jammed.
pooch is offline   Reply With Quote