[johnny]

lots of great ideas given .but how does the back of the hood fit to the top of the cowl ? is it down tight ? when the hood is up on just the safety catch [ie there is a gap between the grille and the front of hood ] does the back of the hood fit tighter to the cowl and do the mouldings line up better .Is the hood sitting tight against the fenders when it is down. If for example the fenders are too high the hood will be held up ..If all of these items are ok rotate the hinges [move the front up and the back down ]this will also move the hood back so you might have to at the same time as rotating the hinge bring it ahead a little. .However if all fits except the moulding take them of and file the holes and don't scratch the paint duck tape the area. John.