Re: Model A no spark
The ammeter and ignition switch should be tested under current. Sometimes voltage will pass with no current but high resistance will block the voltage when there is any current. Lots of things to test. Just go through the wiring with a multimeter while the ignition is on and points are closed.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|