The Ford Barn - View Single Post - King Pin not matting with brake shaft housing

Terry,OH · 01-22-2023, 07:51 AM

I see there are two different part numbers for the front brake shaft housing 32-34 and 35-36. The 35-36 is listed as 4.87" O.A.L. I do not have the Spec. for the 32-34 housing length.

01-22-2023, 07:51 AM	#8
Terry,OH Senior Member Join Date: May 2010 Posts: 4,773	Re: King Pin not matting with brake shaft housing – 1932 Ford I see there are two different part numbers for the front brake shaft housing 32-34 and 35-36. The 35-36 is listed as 4.87" O.A.L. I do not have the Spec. for the 32-34 housing length.