The Ford Barn - View Single Post

Ian NZ · 05-04-2013, 03:27 AM

What is the diameter of the steel in a Model A crank handle as the diameter of the round steel in the handle for the jack is 9/16" which is not a standard size for stock bar. I know I will probably have to turn down any round bar in the lathe to that size which is not a problem as long as the straight bit is about 24" long.

05-04-2013, 03:27 AM	#10
Ian NZ Senior Member Join Date: May 2010 Location: Taranaki, New Zealand Posts: 922	Re: Bumper jack handle What is the diameter of the steel in a Model A crank handle as the diameter of the round steel in the handle for the jack is 9/16" which is not a standard size for stock bar. I know I will probably have to turn down any round bar in the lathe to that size which is not a problem as long as the straight bit is about 24" long.