View Single Post
Old 12-26-2011, 06:14 PM   #5
columbiA
Senior Member
 
Join Date: Nov 2011
Location: B.C. Canada
Posts: 1,746
Default Re: Timing the model a....

It sounds like you were trying to find TDC on the Flywheelthru the inner starter bolt hole .Maybe just the way you worded it.Just push pin while slowly turning engine with hand crank & you should feel pin go in sleight depression in Cam gear.Once found,Ive made made the dimple a little deeper by useing a drill bit & turning it with my fingers as the gear is generally made of fibre.
columbiA is offline   Reply With Quote