[Fhane]

We have corrected the problem if not to severe. This can happen when installing a new spring if not careful. The problem can be caused by all stated above. Put the car on a level surface. Loosen the all nuts that hold the U bolts for the spring or springs in question. Rock the car so it sits level to the level surface. Now tighten the nuts on the U bolts carefully as not to off set the level of the car. If you tighten the two bolts on one side of the U bolt too much at one time the car will lean to that side. Having an observer should help. When tightening the U bolts you can usually level the car. Good luck.