The Ford Barn - View Single Post

flatjack9 · 11-25-2014, 06:33 PM

Where are the cracks? The 59 heads can be mounted on the 8BA. There is a water hole at the front on each side that has to be blocked. The cam swap is no problem either. The front cover is a direct swap. I would change the gear on the front of the crank to the 59 gear.

11-25-2014, 06:33 PM	#2
flatjack9 Senior Member Join Date: May 2010 Location: Oshkosh, Wi Posts: 4,527	Re: 59A Engine update Where are the cracks? The 59 heads can be mounted on the 8BA. There is a water hole at the front on each side that has to be blocked. The cam swap is no problem either. The front cover is a direct swap. I would change the gear on the front of the crank to the 59 gear.