View Single Post
Old 04-20-2012, 07:25 AM   #4
Patrick L.
Senior Member
 
Patrick L.'s Avatar
 
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
Default Re: drag link advise

Have you measured your balls ?? Steering balls, that is.. If they are worn much more than about .020" you might consider replacing them.. As said, the springs should be compressed about 1/4 of its length, but, the newer springs seem to be different length than the originals and there may be trouble with the caps and cotter pins so you may have to tighten them a bit more.. If replacing the tie-rod springs then the toe-in will have to be re-set[1/16"]..
Patrick L. is offline   Reply With Quote