View Single Post
Old 06-10-2010, 05:51 AM   #4
KGS
Senior Member
 
KGS's Avatar
 
Join Date: May 2010
Location: Schooley's Mountain
Posts: 530
Default Re: '41 ford VIN question--help!

At the top of the transmission bell housing, above the inspection plate, there is a flat machined area where the number is stamped. If your transmission hasn't been replaced, the same number as the one on your frame is stamped there . You may have to pull up the floor board to see it. This applies to the 1/2 ton and cars. I'm not positive that this applies to the 3/4 ton but it's worth a look see.
KGS is offline   Reply With Quote