The Ford Barn - View Single Post

van Dyck · 01-21-2011, 11:08 PM

Southfork, if you can obtain one for a pattern, and you or someone you know is handy with a metal lathe a very close replica can be fabricated (we're talking fender brace here).This is what I'm having to do on my '25 rpu.

Thanks TMODELMAN for the history lesson on the 1/4 ton pickup beds. Over the years I have managed to acquire at least one of each of the four designs.

01-21-2011, 11:08 PM	#9
van Dyck Senior Member Join Date: May 2010 Location: Saskatchewan, Canada Posts: 190	Re: 1925 model T pickup bed Southfork, if you can obtain one for a pattern, and you or someone you know is handy with a metal lathe a very close replica can be fabricated (we're talking fender brace here).This is what I'm having to do on my '25 rpu. Thanks TMODELMAN for the history lesson on the 1/4 ton pickup beds. Over the years I have managed to acquire at least one of each of the four designs.