Quote:
Originally Posted by Theo
Hi guys,
I noticed my car was spraying some coolant all over the engine bay today. I saw it was coming from the lower water neck (one that the water tube attaches to)
I noticed the bolts were very loose. I tried to tighten them and they would tighten and then loosen, which is a sure sign of either a stripped bolt or screwhole. The bolt is fine, so Im assuming its the thread on the screwholes. Bolts are the right ones and are the proper size.
How could I go about fixing this?
thanks!
|
Or of a bolt that is the wrong size. Make sure you are using a 7/16-13 bolt. Should be dome headed and 1 1/2" long.