Re: Exhaust Bracket
Gary here's a few shots of the duals on the 34 P/U. I don't like the left side looping down under the frame. I used a hole saw and extended the round hole on the passenger side into an elongated hole like the hole in the frame on the passenger side. I have an exhaust pipe bemding machine and made a 2 piece header pipe that curves around the steering column. Also made a battery box and mounted the Optima battery long ways so there is plenty of clearance between the battery and exhaust pipe so no heat is near the battery. The solenoid laying on top of the frame is just there to start the engine temperarly. The frame bracket behind the L/S muffler is on both sides. G.M.
|